Ingredients：imported acrylic emulsion, pigment, imported accessory ingredients and water.
Coating appearance：mercerizing
Features：silk luster and fine texture
Excellent water resistance and alkali resistance
strong covering power, mildew proof, penetration
Outstanding scrubbing resistance performance
Application instructions：Construction methods：roller coating, brush coating and spray coating
construction temperature：above 5℃
Recoating temperature：above 2 hours（25℃）
Dilution status：at most 15-20% of water（W:W）use after stirring evenly
Paint consumption amount：theoretical value 11-13m2/l/layer
Storage requirements：stored in 0℃-35℃ dry and cool conditions
Application range：cement plaster surface, brick structure, asbestos board, wood surface and plaster board
Construction requirements：water addition amount should be the same for every bucket; the coat should be thin and uniform.
Performance index：status in the container：no hard lump and uniform status
Scrubbing resistance ≥2000 times
Alkali resistance ：24h
Contrast ratio：≥0.93
Basic requirement：basic layer should be dry, no oil, mildew and other substances. The new walls should coat VD-6000 closed primer, and brushes finishing coat twice. Old and loose paint film should be washed by high pressure water or removed by scrapers. The humidity of the wall body should be below 6%; PH value ＜10
Executive standard：GB/T9756-2001GB/T18582-2001
Shelf life：12 months